|Note: You may want to trace
the pattern onto a piece of freezer paper. Ironing the fabric onto
the shiny side of the paper will help hold it in place. Be sure to
put your marks on the papery side, not the plastic side.
Directions for Fabric Snowman:
Go to suggestions for framing.
Cut out the Pattern for Fabric Snowman Sections A, B and
C, adding 1/4 inch seam allowance on outside edges.
Cut a piece of hat fabric large enough to cover space 1A
with at least 1/4 inch seam allowance on all sides. Place the fabric
on the back of the pattern covering the space. The right side of
the fabric should face away from the pattern. (If you are using freezer
paper, you can press this piece in place.)
Cut a piece of fabric for the background large enough to
cover space 2A plus seam allowances. Place this fabric right sides
together with piece 1A. Remember you will be doing this on the “wrong”
side of the pattern.
Holding the fabric in place, turn the pattern line-side up
and sew along the line between 1A and 2A. Open the seam and check to see
that the fabric covers space 2A.
Fold the pattern along the seam line, and trim the seam to
1/8 inch. Unfold and press.
Repeat steps 3-5 for spaces 3A through 7A using the appropriately
Construct Sections B and C.
With right sides facing, join Sections A and B at points
and x. Sew the seam between the points and press open.
With right sides facing join Sections B and C at points
y and z Sew the seam and press open.